Model 5700 Therm-O-Seal

CLICK HERE FOR PRINTABLE/ELECTRONIC SUBMISSION PDF

Vent_5700 Vent_5700dim1 Vent_5700dim2

STANDARD SPECIFICATIONS

  • FRAME: 14 gauge galvanized press formed steel.
    18 gauge galvanized press formed steel.
  • BLADES: 18 gauge galvanized steel liner.
  • INSULATION: 1/2" Polyurethane foam between blade and liner, extending full length of each blade
  • AXLES: 1/2" dia. x 2" long plated steel rods.
  • BEARINGS: 1/2" dia. self lubricating porous bronze.
  • BLADE EDGE SEAL: Extruded dual durometer Dyn-O-Grip.
  • SIDE SEALS: Spring Stainless Steel.
  • CONTROL ROD: 1/2" dia. x 9" long plated steel.
  • HARDWARE: Plated steel center brackets, brass pivots, 1/4" or 5/16" dia. plated steel linkage rod.
  • FINISH: Standard Mill.
  • MAX. VELOCITY: 2000 fpm
  • TEMPERATURE RANGE: -40°F -+ 160°F
  • MAXIMUM SINGLE SECTION: 36" x 60"
  • MINIMUM SIZE: Model 5701: 12" x 9"
    Model 5702-3: 12" x 15"

OPTIONS

  • -11 Ball Bearings (side seals not available).
  • -12 Nylon Bearings (Bushings).
  • -31 Flange, 1 1/2" fastened to damper frame (opposite linkage).
  • -89 Sleeve.
  • -90 Jackshaft.
  • -92 Actuators.

NOTES

  1. A and B are opening dimensions. Unless otherwise specified, dampers are made 1/4" undersize.
  2. Insulating "K" factor is .28
  3. "U" factor is .57 BTU per hour per square foot per degree F
  4. Blades are a fixed width. Some sizes require blank-offs.
5700air 5700leak

User Notes

  1. Using the box below, write your notes.
  2. Click the 'Generate Savable Copy' button, which will pop up a new window with your notes in the text box.
  3. In the new window use the tool bar and choose 'File -> Save As' to save a copy of this webpage to your computer. Make sure you select the 'Save Complete Webpage' option, so the images are included.

You can now view and edit your notes on your copy of the webpage. To make additional changes to copy saved on your computer, follow the same process as outlined above.